Wing Velcro MBTIR/HARRIS Radio Pouch Left Side – Black
Available in
Wing Velcro MBTIR/HARRIS Radio Pouch Left Side – Ranger Green
Our Laser Cut Wing Velcro MBITR/Harris Radio Pouch (Left Side) can accommodate both the MBITR 148 and Harris PRC 152. Velcro and bungee closure is fully adjustable for height and double Mil-Spec elastic provides the lateral tension for both radios. The MV-MHRP-L Velcro’s under the front panel of the full...
Wing Velcro MBTIR/HARRIS Radio Pouch Left Side – MultiCam
Our Laser Cut Wing Velcro MBITR/Harris Radio Pouch (Left Side) can accommodate both the MBITR 148 and Harris PRC 152. Velcro and bungee closure is fully adjustable for height and double Mil-Spec elastic provides the lateral tension for both radios. The MV-MHRP-L Velcro’s under the front panel of the full...
Related Products
Low Profile Carrier V2 Black
The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
Low Profile Carrier V2 MK1 Combo Black
- Size(S-M) 34” (86cm) – 42” (106cm) Chest
- Size(M-L) 42” (106cm) – 50” (127cm) Chest
- Comes with Ladder Sides
- Includes Detachable MK1 Panel
- 3 x 5.56 Bungee Magazines Pouches
- 2 x 9mm Magazines Pouches
- 2 x Small Utility Pouches
- Free Plain MOLLE Detachable Panel
- Made from Mil Spec Materials
- Thermo Pads for Cooling & Comfort
- Compatible with Back Panels
- Interchangeable Front Panels
- Quick release Speed Clips
- Large Upper Admin Pocket
- Removable shoulder Pads
- Hypalon shoulders
- Low profile
- Lightweight
Pathfinder Chest Rig Black
The PCR is an excellent addition to the Warrior Assault Systems product line. Designed to work as a compact Chest Rig in stand-alone configuration or in conjunction with Warrior’s Recon Carrier System (RPC). The PCR accommodates 4 x M4 style mags with adjustable bungee retention which allows AK mags to...
Low Profile Carrier V1 MK1 Combo OD Green
- Size(S-M) 34” (86cm) – 42” (106cm) Chest
- Size(M-L) 42” (106cm) – 50” (127cm) Chest
- Comes with Solid Sides
- Includes Detachable MK1 Panel
- 3 x 5.56 Bungee Magazines Pouches
- 2 x 9mm Magazines Pouches
- 2 x Small Utility Pouches
- Free Plain MOLLE Detachable Panel
- Made from Mil Spec Materials
- Thermo Pads for Cooling & Comfort
- Compatible with Back Panels
- Interchangeable Front Panels
- Quick release Speed Clips
- Large Upper Admin Pocket
- Removable shoulder Pads
- Hypalon shoulders
- Low profile
- Lightweight
Low Profile Carrier V1 Black
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
Size Medium: Will fit up to a size 45" (114cm) chest.
Size Large: Will fit Chest sizes 45" (114cm) to 52" (132cm)
Triple Snap Mag Utility Pouch – Black
The Triple Snap Mag Utility Pouch is designed to be completely adaptive to a variety of missions. The rear section accommodates 3 x 5.56mm or 3 x 7.62mm x 39mm AK Magazines in Warrior’s secure thermoplastic inserts for rapid access. On the front there is a large pouch with 2...
Drop Down Velcro Utility Pouch – Black
Our Laser Cut Drop Down Velcro Utility Pouch hangs under the front flap of most carriers and attaches quickly and securely via Velcro. Ideal for use with Warriors LPC, DCS, RPC, QRC and PCR Chest rig. There are 2 zip pockets, the larger and main compartment is designed for storage...
Laser Cut Assaulters Back Panel Mk1 – Black
Our Laser Cut Assaulters Back Panel (ABP), has been designed to be compatible with the full range of Warriors Laser Cut LPC Carrier can also be used with our Elite Ops range of carriers, (DCS, RPC, LPC and QRC) The ABP quickly zips on to the rear of the carrier...
Detachable Triple MOLLE Open Pouch – Black
The DFP-TMOP is a removable MOLLE Front Panel which attaches on the front of Warriors Recon Carrier (RPC via the 2 Vertical SQM clips). The RPC-TMOP holds 3 x 5.56mm x 45mm mags and 3 x 7.62mm x 39mm AK47 mags in a compact panel configuration. Mags are held in...
Laser Cut Universal Tourniquet Holder Black
Our Laser Cut Universal Tourniquet Holder can be belt mounted or attached to any carrier in the Warrior range. Allows single-handed opening for quick and easy removal. Attaches with a single MOLLE arm. This pouch will also hold the SOFFT Tourniquet. Engineered from our high-quality composite laminate material and manufactured...