Navigation

Small Vertical Utility Pouch – Black

‹Return to Previous Page

Small Vertical Utility Pouch – Black

Related Products

Single Bungee 5.56 Pouch – MultiCam

Our Laser Cut Single 5.56 Mag Pouch attaches to the full range of Warriors Belts and Carries. The W-LC-SB-556P holds a single 5.56mm x 45mm mag, and is held in place via bungee retention cord, Hypolon lining provides additional mag retention when bungee safety is removed. Each mag pouch has...

Double Bungee Pistol Pouch – MultiCam

Our Laser Cut Double Bungee Pistol Mag Pouch can be belt mounted or attached to any carrier in the Warrior range. Holds most standard 9mm, and .40 Cal pistol mags. Made using Double layered Mil-Spec elastic and laminate to produce an extremely compact design, with Hypalon coated pull tab for...

Small Vertical Utility Pouch – MultiCam

Our Laser Cut Small Vertical Utility Pouch can be used as a general utility pouch or to carry a personal medical kit. There are 4 internal elastic loops and a lined internal pocket/sleeve to help separate and organize gear. The Laser Cut SVUP can be attached via 2 MOLLE arms...

Low Profile Carrier V2 MultiCam

The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds. The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.

Wing Velcro MBTIR/HARRIS Radio Pouch Left Side – MultiCam

Our Laser Cut Wing Velcro MBITR/Harris Radio Pouch (Left Side) can accommodate both the MBITR 148 and Harris PRC 152. Velcro and bungee closure is fully adjustable for height and double Mil-Spec elastic provides the lateral tension for both radios. The MV-MHRP-L Velcro’s under the front panel of the full...

Low Profile Carrier V2 Black

The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds. The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.

Small Horizontal Individual First Aid Kit – MultiCam

Our Laser Cut IFAK pouch is designed to hold an operator’s personal medical kit, including Combat Gauze, CAT and/or Trauma Bandage. They are all stored securely in a removable sleeve, which slots inside the outer pouch. The sleeve and medkit are held firmly in place by elasticated sides and Velcro....

Single 40mm Flash Bang Pouch – MultiCam

Our Laser Cut Single Flash Bang Pouch attaches to the full range of Warriors Carries, Belts and Back Panels. The W-LC-T40-FBP holds 1 x NICO style Multi Bangs and is held in place via bungee retention cord. Made using a combination of double-layered Mil-Spec elastic and Laminate, to produce a...

Laser Cut Universal Tourniquet Holder MultiCam

Our Laser Cut Universal Tourniquet Holder can be belt mounted or attached to any carrier in the Warrior range. Allows single-handed opening for quick and easy removal. Attaches with a single MOLLE arm. This pouch will also hold the SOFFT Tourniquet. Engineered from our high-quality composite laminate material and manufactured...

Detachable Triple Bungee 5.56 Panel – Black

Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical SQM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord,...