Navigation
Military and Tactical Armour Carriers Chest Rigs Belts Pouches
Menu

Shop

‹Return to Previous Page

Elite Ops Small Hydration Carrier – Black Product code: W-EO-SHC-BLK

Elite Ops Small Hydration Carrier – Black
Bug Fix

Product Code: W-EO-SHC-BLK

The Warrior Hydration Carrier can accommodate a single 1.5 litre (50oz) bladder. Designed to be mounted via MOLLE attachments on the back of Carriers and rigs such as the DCS RICAS compact Raptor or on the Warrior Back Panel for use with the Centurion or 901 Range. Includes drainage grommets at bottom for water ops. The lid section has a Velcro Patch for insignia and flags. The inside of the Carrier is lined with Black Posi Grip Fabric for extra strength and insulation.

 

Capacity

1.5 Litres (50oz)

Download Spec Sheet

  • Export as PDF
  • Print
Available in

Elite Ops Small Hydration Carrier – MultiCam

...

Elite Ops Small Hydration Carrier – Coyote Tan

...

Elite Ops Small Hydration Carrier – Ranger Green

...

Specs

Premium Grade Fabric

500D Nylon fabric feature enhanced tear and abrasion resistance, and long lasting durability, 500D Nylon fabric made with solution dyed yarns are inherently stain resistant and easy to clean.

High Quality Threads

Thread quality is fundamental to the construction, durability and strength of the equipment.

Two factors have a negative impact on the life Span of threads

1) Mildew is one of the most common factors in the deterioration fabric, causing it to rot and ultimately results in unacceptable failure.

2) Sunlight has a harmful effect on the performance of threads, and over time causes their deterioration.

Warrior only uses the highest quality nylon threads imported from the USA which are treated against both UV and Mildew.

  • Fiber Resistance to Acid - Good
  • Fiber Resistance to Alkali - Good
  • Fiber Abrasion Resistance - Excellent
  • Fiber Resistance to Heat - 142 deg C (Highest continuous temperature before breakdown)
  • Fiber Melting Point - 265 deg C

Plastic Hardware

Warrior only uses the highest quality rated Clips and accessories.

MOLLE System

This product uses MOLLE to connect to other items creating a modular and adaptive system.

* Products may differ from the picture shown due to product improvements over time

MOLLE Webbing

This product contains MOLLE webbing that will allow you to attach other pouches using the MOLLE system.

  • 25mm (1 Inch ) Breaking Strain: 1200 lbs
  • 38mm (1.5 Inch ) Breaking Strain: 1800 lbs
  • 50mm (2 Inch ) ) Breaking Strain: 2200 lbs

Related Products

Double 40mm Grenade – MultiCam

...

Double Elastic Mag Pouch Black

...

901 Elite Ops Base Chest Rig MultiCam

...

DCS DA 5.56mm Carrier – MultiCam

...

DCS Base Carrier – MultiCam

...

901 AK MultiCam

...

Double Covered G36 – MultiCam

...

DCS Releasable Carrier – MultiCam

2 x side cummerbunds allow ambidextrous opening and closure via Mil Spec Velcro sewn on the lower front of the carrier and sandwiched under a front panel. The front panel has 3 vertical MOLLE rows and 6 horizontal MOLLE loops which allow direct attachment of immediately accessible items such as magazine pouches. Thumb loops in 1 inch webbing greatly expedite the upward movement of the front panel to allow either cummerbund to be opened. The internal walls of the carrier have a 3/8s inch 3D Spacer mesh lining that allows heat from the body to evaporate this coupled with its ability to allow air flow to pass through the mesh results in an excellent cooling effect. The 3D Spacer mesh has positive compression features that greatly enhances the operator's comfort levels. The shoulder sections of the carrier are comprised of double layered 2 inch Mil Spec Camo webbing and are covered with removable padded sleeves which help to spread the weight of the carriers load on the operators shoulders the sleeves can also be opened to allow communication cables and hydration tubes to be routed through.
The rear of the carrier has a 2 inch matched camo reinforced Man Down drag handle for extraction of casualties. The carrier is fully releasable should the user need to rapidly remove the carrier in an emergency situation for example if he falls into water or if a medic needs to treat a serious trauma injury. The carrier incorporates an internal cable system featuring an ambidextrous release pull. The release pull is securely located in the shoulder and allows a smooth rapid separation of the front back and sides of the carrier into individual components. The carrier is fully adjustable for size on the shoulder and girth. All Threads are Type 69 Nylon Bonded construction which are resistant to mildew the effects of UV light and degradation form water heat and cold.

Command Panel Gen2 – MultiCam

...

DCS G36 Carrier – MultiCam

...
Copyright Warrior Assault Systems
Mobile version: Enabled