The FCR is designed to work as a compact Chest Rig in standalone configuration
The FCR accommodates 8 x M4 style mags with adjustable bungee retention which allows AK mags to be easy changed out. There are a total of 4 utility pouches. The end pouches can hold MBITR 148 radios there are elastic loops for storage of chemlights small torches etc at the sides of the end pouches.
Warrior's DPDA-9 double pistol mag pouch is attached to the front of the rig with MOLLE and can be removed or replaced as required.
The unique feature about the FCR is its ability to attach to Warrior’s new RPC (Recon Carrier). Simply remove the shoulder and rear straps and all the remaining clips line up with the corresponding ITW clips located on the front and sides of the RPC carrier creating a scalable platform.
Made from high quality fabric
* The pictures may not reflect product enhancement’s and developments that have occurred since the photograph was taken
The FCR is designed to work as a compact Chest Rig in standalone configuration. The FCR accommodates 8 x M4 style mags with adjustable bungee retention which allows AK mags to be easy changed out. There are a total of 4 utility pouches. The end pouches can hold MBITR 148...
The FCR is designed to work as a compact Chest Rig in standalone configuration The FCR accommodates 8 x M4 style mags with adjustable bungee retention which allows AK mags to be easy changed out. There are a total of 4 utility pouches. The end pouches can hold MBITR 148...
Warriors G36 Mag pouches have been specifically designed to hold H&K manufactured 5.56mm magazines with attachment lugs on each side. Warriors unique mag pouch design allows a smooth non snag draw. Covered velcro flaps offer extra security and prevent dirt and debris from entering the pouch. Each pouch holds...
The Double Horizontal Breaching Shotgun Panel attaches directly onto the front or rear of the DCS RICAS Compact Raptor or they can be fastened onto the front of Warriors Triple MOLLE Open pouch. The panel holds up to 14 rounds of 12 gauge Hatton breaching shotgun shells / CS Marker...
Warrior’s Covert Carrier (CPC) is a low profile slick carrier designed to hold 10 x 12 s and US style SAPI s. The CPC is fully adjustable on the shoulders for size. The sides are made from double layer high quality elastic and incorporate 2 internal pouches on each side...
Warrior’s Elite Ops 901 AK is set up on the 901 Front Opening (Patent Pending) MOLLE Platform which has revolutionised the use of the modern Chest platform. The 901 base has always been the basis for all the 901 rigs and we all know how good this kit is when...
2 x side cummerbunds allow ambidextrous opening and closure via Mil Spec Velcro sewn on the lower front of the carrier and sandwiched under a front panel. The front panel has 3 vertical MOLLE rows and 6 horizontal MOLLE loops which allow direct attachment of immediately accessible items such as magazine pouches. Thumb loops in 1 inch webbing greatly expedite the upward movement of the front panel to allow either cummerbund to be opened.
The internal walls of the carrier have a 3/8s inch 3D Spacer mesh lining that allows heat from the body to evaporate this coupled with its ability to allow air flow to pass through the mesh results in an excellent cooling effect. The 3D Spacer mesh has positive compression features that greatly enhances the operator's comfort levels. The shoulder sections of the carrier are comprised of double layered 2 inch Mil Spec Camo webbing and are covered with removable padded sleeves which help to spread the weight of the carriers load on the operators shoulders the sleeves can also be opened to allow communication cables and hydration tubes to be routed through.
The rear of the carrier has a 2 inch matched camo reinforced Man Down drag handle for extraction of casualties.
The carrier is fully releasable should the user need to rapidly remove the carrier in an emergency situation for example if he falls into water or if a medic needs to treat a serious trauma injury. The carrier incorporates an internal cable system featuring an ambidextrous release pull. The release pull is securely located in the shoulder and allows a smooth rapid separation of the front back and sides of the carrier into individual components. The carrier is fully adjustable for size on the shoulder and girth.
All Threads are Type 69 Nylon Bonded construction which are resistant to mildew the effects of UV light and degradation form water heat and cold.
Size: Small To Medium
34" to 42" chest
86cm to 106cm chest
Size: Medium To Large
42" to 50" chest
106cm to 127cm chest
Warrior’s Cargo Pack is designed to attach to the back of any MOLLE Vest or Rig. It comprises 1 x large main compartment and 2 x smaller external compartments. Includes interior hydration sleeve which will hold up to a 3ltr hydration reservoir, exterior MOLLE webbing for the addition of extra...
This SF Bergen features removable side pouches Internal light weight frame large carry capacity designed to be worn with belt kit. An awesome piece of professional kit favoured by UK Special Forces. Size Main Compartment 7.5″ x 20″ x 18″ (190mm x 500mm x 450mm) No 1 Outer Compartment 4″...
Use the search box to find the product you are looking for.
No products in the cart.
Privacy & Cookies Policy
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.