Wing Velcro MBTIR/HARRIS Radio Pouch Left Side – MultiCam
Available in
Wing Velcro MBTIR/HARRIS Radio Pouch Left Side – Ranger Green
Our Laser Cut Wing Velcro MBITR/Harris Radio Pouch (Left Side) can accommodate both the MBITR 148 and Harris PRC 152. Velcro and bungee closure is fully adjustable for height and double Mil-Spec elastic provides the lateral tension for both radios. The MV-MHRP-L Velcro’s under the front panel of the full...
Related Products
Single Bungee 5.56 Pouch – MultiCam
Our Laser Cut Single 5.56 Mag Pouch attaches to the full range of Warriors Belts and Carries. The W-LC-SB-556P holds a single 5.56mm x 45mm mag, and is held in place via bungee retention cord, Hypolon lining provides additional mag retention when bungee safety is removed. Each mag pouch has...
Wing Velcro ARP Left Side – MultiCam
Our Laser Cut Winged Velcro Adjustable Radio Pouch ( Left Side ) can accommodate a wide variety of personal radios. Velcro and bungee closure is fully adjustable for height and double Mil-Spec elastic provides the lateral tension for various widths of radio. The WV-ARP-L Velcro’s under the front panel of...
Small Horizontal Individual First Aid Kit – MultiCam
Our Laser Cut IFAK pouch is designed to hold an operator’s personal medical kit, including Combat Gauze, CAT and/or Trauma Bandage. They are all stored securely in a removable sleeve, which slots inside the outer pouch. The sleeve and medkit are held firmly in place by elasticated sides and Velcro....
Low Profile Laser Belt with Cobra Buckle Belt – MultiCam
This variation of the belt comes with a composite GT Cobra buckle belt. Our Laser Cut Low Profile Laser Belt (LPLB) offers a very light weight, and extremely strong, 2 stage low profile platform capable of carrying a wide variety of mission specific pouches and holsters including Drop Leg rigs....
Double Bungee Pistol Pouch – MultiCam
Our Laser Cut Double Bungee Pistol Mag Pouch can be belt mounted or attached to any carrier in the Warrior range. Holds most standard 9mm, and .40 Cal pistol mags. Made using Double layered Mil-Spec elastic and laminate to produce an extremely compact design, with Hypalon coated pull tab for...
Single 40mm Flash Bang Pouch – MultiCam
Our Laser Cut Single Flash Bang Pouch attaches to the full range of Warriors Carries, Belts and Back Panels. The W-LC-T40-FBP holds 1 x NICO style Multi Bangs and is held in place via bungee retention cord. Made using a combination of double-layered Mil-Spec elastic and Laminate, to produce a...
Compact Dump Pouch – MultiCam
Our Laser Cut Compact Dump Pouch can be belt mounted or attached to any carrier in the Warrior range. Made using a combination of Mil-Spec elastic and nylon to produce an extremely compact design. To open, simply release the outer Hypalon safety tab and then pull the inner tab to...
Detachable Triple Bungee 5.56 Panel – MultiCam
Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical SQM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord,...
Multi Tool Pouch – MultiCam
Our Laser Cut Multi-tool Pouch can be belt mounted or attached to any carrier in the Warrior range. Holds most standard single-handed opening compact tools from Gerber, Leatherman, etc. Attaches a single MOLLE arm. Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced...
Low Profile Carrier V2 MultiCam
The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.