Riggers Belt Coyote Tan
Available in
Riggers Belt Tan
Warriors Elite Ops Riggers Belt is made from the highest standard materials.The webbing used is 4088 type V11 and has a breaking strain greater than 6000 lbs. The Metal Buckles are made from heat treated hardware with a tensile strength of 2500 lbs and finished in Dark Grey Phosphate. The...
Riggers Belt Black
Warriors Elite Ops Riggers Belt is made from the highest standard materials.The webbing used is 4088 type V11 and has a breaking strain greater than 6000 lbs. The Metal Buckles are made from heat treated hardware with a tensile strength of 2500 lbs and finished in Dark Grey Phosphate. The...
Riggers Belt OD Green
Warriors Elite Ops Riggers Belt is made from the highest standard materials.The webbing used is 4088 type V11 and has a breaking strain greater than 6000 lbs. The Metal Buckles are made from heat treated hardware with a tensile strength of 2500 lbs and finished in Dark Grey Phosphate. The...
Related Products
Command Panel – MultiCam
The Warrior Command Panel allows the use of navigational items maps and other admin on a protected flat clean surface. Also features an internal transparent map sleeve. The Panel has 6 MOLLE columns wide across the front and allows enough space for the attachment of extra pouches. On the inside...
DCS AK 7.62mm Carrier – MultiCam
Size: Medium 34″ to 42″ chest 86cm to 106cm chest Size: Large 42″ to 50″ chest 106cm to 127cm chest The DCS is a lightweight low profile system which is rugged yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators the DCS...
Covert Carrier MultiCam MK1
Warriors MK1 Covert Carrier C.P.C. MK1 is a low profile Slick carrier designed to hold 10 x 12 s and US style SAPI s. The CPC is fully adjustable on the shoulders for size. The sides are made from double layer high quality Elastic and incorporate 2 internal pouches...
Elite Ops Centurion Chest Rig MultiCam
Warrior’s Centurion Chest Rig is a low profile compact carrier (can be used with or without ballistic s) which can be used as a front only rig and comes with H Harness and Cross Harness. The Centurion can also be integrated with Warriors Back Panel to provide a complete low...
901 AK MultiCam
Warrior’s Elite Ops 901 AK is set up on the 901 Front Opening (Patent Pending) MOLLE Platform which has revolutionised the use of the modern Chest platform. The 901 base has always been the basis for all the 901 rigs and we all know how good this kit is when...
901 Elite Ops Bravo M4 Chest Rig MultiCam
The 901 Bravo M4 is set up on the 901 Front Opening (Patent Pending) MOLLE Platform which has revolutionised the use of the modern Chest platform. The 901 base has always been the basis for all the 901 rigs and we all know how good this kit is when used...
Elite Ops BMF Bergen Multicam
This SF Bergen features removable side pouches Internal light weight frame large carry capacity designed to be worn with belt kit. An awesome piece of professional kit favoured by UK Special Forces. Size Main Compartment 7.5″ x 20″ x 18″ (190mm x 500mm x 450mm) No 1 Outer Compartment 4″...
DCS Base Carrier – MultiCam
Size: Medium 34″ to 42″ chest 86cm to 106cm chest Size: Large 42″ to 50″ chest 106cm to 127cm chest The DCS is a lightweight low profile system which is rugged yet ergonomically designed to provide exceptional comfort and functionality. Designed with direct input from active S.F. Operators the DCS...
DCS Releasable Carrier – MultiCam
2 x side cummerbunds allow ambidextrous opening and closure via Mil Spec Velcro sewn on the lower front of the carrier and sandwiched under a front panel. The front panel has 3 vertical MOLLE rows and 6 horizontal MOLLE loops which allow direct attachment of immediately accessible items such as magazine pouches. Thumb loops in 1 inch webbing greatly expedite the upward movement of the front panel to allow either cummerbund to be opened.
The internal walls of the carrier have a 3/8s inch 3D Spacer mesh lining that allows heat from the body to evaporate this coupled with its ability to allow air flow to pass through the mesh results in an excellent cooling effect. The 3D Spacer mesh has positive compression features that greatly enhances the operator's comfort levels. The shoulder sections of the carrier are comprised of double layered 2 inch Mil Spec Camo webbing and are covered with removable padded sleeves which help to spread the weight of the carriers load on the operators shoulders the sleeves can also be opened to allow communication cables and hydration tubes to be routed through.
The rear of the carrier has a 2 inch matched camo reinforced Man Down drag handle for extraction of casualties.
The carrier is fully releasable should the user need to rapidly remove the carrier in an emergency situation for example if he falls into water or if a medic needs to treat a serious trauma injury. The carrier incorporates an internal cable system featuring an ambidextrous release pull. The release pull is securely located in the shoulder and allows a smooth rapid separation of the front back and sides of the carrier into individual components. The carrier is fully adjustable for size on the shoulder and girth.
All Threads are Type 69 Nylon Bonded construction which are resistant to mildew the effects of UV light and degradation form water heat and cold.
Size: Large
42" to 50" chest
106cm to 127cm chest