Large Horizontal Utility Pouch – Ranger Green
Related Products
Detachable Triple Bungee 5.56 Panel – MultiCam
Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical SQM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord,...
Single Bungee Pistol Pouch – MultiCam
Our Laser Cut Single Bungee Pistol Mag Pouch can be belt mounted or attached to any carrier in the Warrior range. Holds most standard 9mm, and .40 Cal pistol mags. Made using Double layered Mil-Spec elastic and laminate to produce an extremely compact design, with Hypalon coated pull tab for...
MBITR/HARRIS Radio Pouch – Ranger Green
Our Laser Cut MBITR/Harris Radio Pouch can accommodate both the MBITR 148 and Harris PRC 152. Velcro and bungee closure is fully adjustable for height and double Mil-Spec elastic provides the lateral tension for both radios. The Laser-Cut MV-MHRP-L can be attached via 2 MOLLE arms to the range of...
Drop Down Velcro Utility Pouch – MultiCam
Our Laser Cut Drop Down Velcro Utility Pouch hangs under the front flap of most carriers and attaches quickly and securely via Velcro. Ideal for use with Warriors LPC, DCS, RPC, QRC and PCR Chest rig. There are 2 zip pockets, the larger and main compartment is designed for storage...
Double Bungee Pistol Pouch – MultiCam
Our Laser Cut Double Bungee Pistol Mag Pouch can be belt mounted or attached to any carrier in the Warrior range. Holds most standard 9mm, and .40 Cal pistol mags. Made using Double layered Mil-Spec elastic and laminate to produce an extremely compact design, with Hypalon coated pull tab for...
Low Profile Carrier V2 MultiCam
The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
Single Bungee 5.56 Pouch – MultiCam
Our Laser Cut Single 5.56 Mag Pouch attaches to the full range of Warriors Belts and Carries. The W-LC-SB-556P holds a single 5.56mm x 45mm mag, and is held in place via bungee retention cord, Hypolon lining provides additional mag retention when bungee safety is removed. Each mag pouch has...
Compact Dump Pouch – Ranger Green
Our Laser Cut Compact Dump Pouch can be belt mounted or attached to any carrier in the Warrior range. Made using a combination of Mil-Spec elastic and nylon to produce an extremely compact design. To open, simply release the outer Hypalon safety tab and then pull the inner tab to...
Small Vertical Utility Pouch – Ranger Green
Our Laser Cut Small Vertical Utility Pouch can be used as a general utility pouch or to carry a personal medical kit. There are 4 internal elastic loops and a lined internal pocket/sleeve to help separate and organise gear. The Laser Cut SVUP can be attached via 2 MOLLE arms...
Triple 40mm Flash Bang Pouch – MultiCam
Our Laser Cut Triple Flash Bang Pouch attaches to the back of the full range of Warriors Carries and back panels. The W-LC-T40-FBP holds 3 x NICO style Multi Bangs and is held in place via bungee retention cord. Made using a combination of double-layered Mil-Spec elastic and Laminate, to...