Navigation

Low Profile Carrier V2 MultiCam

Ă¢â‚¬Â¹Return to Previous Page

Low Profile Carrier V2 MultiCam

The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.

The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.

Related Products

Low Profile Carrier V1 Black

The Warrior Laser Cut Low Profile Plate Carrier (LPC) is at the forefront of cutting edge innovation. Manufactured using our proprietary laminate material and precision cut using the highest quality laser technology for optimum production accuracy to produce a flawless lightweight solution. Designed with direct input from serving operators within...

Laser Cut LPC (with Ladder Sides) with Detachable Triple Bungee 5.56 Panel Ranger Green

The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds. The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific. Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical QASM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord, Hypalon lining provides additional mag retention when bungee safety is removed. Each front panel pouch has 4 MOLLE slots externally, allowing the attachment of additional pouches such as pistol mag pouches, CAT pouch or Multitool pouch. Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced laser cutting machines.

Low Profile Carrier V1 MK1 Ranger Green

The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds. The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific. Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical QASM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord, Hypalon lining provides additional mag retention when bungee safety is removed. Each front panel pouch has 4 MOLLE slots externally, allowing the attachment of additional pouches such as pistol mag pouches, CAT pouch or Multitool pouch. Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced laser cutting machines.

Laser Cut LPC (with Ladder Sides) with Detachable Triple Bungee 5.56 Panel MultiCam

The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds. The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific. Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical QASM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord, Hypalon lining provides additional mag retention when bungee safety is removed. Each front panel pouch has 4 MOLLE slots externally, allowing the attachment of additional pouches such as pistol mag pouches, CAT pouch or Multitool pouch. Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced laser cutting machines.

Low Profile Carrier V1 MK1 Black

The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds. The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific. Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical QASM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord, Hypalon lining provides additional mag retention when bungee safety is removed. Each front panel pouch has 4 MOLLE slots externally, allowing the attachment of additional pouches such as pistol mag pouches, CAT pouch or Multitool pouch. Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced laser cutting machines.

Triple 40mm Flash Bang Pouch – MultiCam

Our Laser Cut Triple Flash Bang Pouch attaches to the back of the full range of Warriors Carries and back panels. The W-LC-T40-FBP holds 3 x NICO style Multi Bangs and is held in place via bungee retention cord. Made using a combination of double-layered Mil-Spec elastic and Laminate, to...

Single Bungee 5.56 Pouch – MultiCam

Our Laser Cut Single 5.56 Mag Pouch attaches to the full range of Warriors Belts and Carries. The W-LC-SB-556P holds a single 5.56mm x 45mm mag, and is held in place via bungee retention cord, Hypolon lining provides additional mag retention when bungee safety is removed. Each mag pouch has...

Multi Tool Pouch – MultiCam

Our Laser Cut Multi-tool Pouch can be belt mounted or attached to any carrier in the Warrior range. Holds most standard single-handed opening compact tools from Gerber, Leatherman, etc. Attaches a single MOLLE arm. Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced...

Fight Light Belt – MultiCam

Our Laser Cut Fight Light Belt, is a slimline belt solution that has been designed to be compatible with the full range of Warriors laser pouches and holsters. The Fight Light Belt has a 45mm tall profile and has a series of horizontal laser cut slots that accept MOLLE webbing...

Low Profile Laser Belt with Cobra Buckle Belt – MultiCam

This variation of the belt comes with a composite GT Cobra buckle belt. Our Laser Cut Low Profile Laser Belt (LPLB) offers a very light weight, and extremely strong, 2 stage low profile platform capable of carrying a wide variety of mission specific pouches and holsters including Drop Leg rigs....