Double Bungee Pistol Pouch – MultiCam
Available in
Double Bungee Pistol Pouch – Ranger Green
Our Laser Cut Double Bungee Pistol Mag Pouch can be belt mounted or attached to any carrier in the Warrior range. Holds most standard 9mm, and .40 Cal pistol mags. Made using Double layered Mil-Spec elastic and laminate to produce an extremely compact design, with Hypalon coated pull tab for...
Related Products
Drop Down Velcro Utility Pouch – MultiCam
Our Laser Cut Drop Down Velcro Utility Pouch hangs under the front flap of most carriers and attaches quickly and securely via Velcro. Ideal for use with Warriors LPC, DCS, RPC, QRC and PCR Chest rig. There are 2 zip pockets, the larger and main compartment is designed for storage...
Small Vertical Utility Pouch – Black
Our Laser Cut Small Vertical Utility Pouch can be used as a general utility pouch or to carry a personal medical kit. There are 4 internal elastic loops and a lined internal pocket/sleeve to help separate and organize gear. The Laser Cut SVUP can be attached via 2 MOLLE arms...
Low Profile Carrier V2 MultiCam
The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
Detachable Triple Snap Mag Panel – MultiCam
Warriors Triple Snap Mag Panel, is a designed to hold 3 x 5.56 mags which are held in place by thermoplastic sleeves, allowing strong retention with the advantage of single pull mag draw, for fast dynamic reloads. The panel comes with a Velcro back and 2 male clips designed to...
Wing Velcro MBTIR/HARRIS Radio Pouch Left Side – MultiCam
Our Laser Cut Wing Velcro MBITR/Harris Radio Pouch (Left Side) can accommodate both the MBITR 148 and Harris PRC 152. Velcro and bungee closure is fully adjustable for height and double Mil-Spec elastic provides the lateral tension for both radios. The MV-MHRP-L Velcro’s under the front panel of the full...
Frag Grenade Pouch – MultiCam
Our Laser Cut Frag Grenade Pouch is manufactured using a combination of double-layered Mil-Spec elastic and laminate. Holds a single M67 style fragmentation grenade, includes a plastic clip for single-handed silent opening. Attaches via two MOLLE arms. Engineered from our high-quality composite laminate material and manufactured using our state of...
Smoke Grenade Pouch – MultiCam
Our Laser Cut Smoke Grenade Pouch can be belt mounted or attached to any of Warriors Carriers, Belts or 901 style Chest Rigs. Holds a single smoke or phosphorus grenade, and includes a plastic clip for single-handed silent opening. Made using a combination of double Mil-Spec elastic and laminate. Attaches...
Detachable Triple Bungee 5.56 Panel – MultiCam
Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical SQM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord,...
Detachable Triple Bungee 5.56 Panel – Black
Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical SQM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord,...
LASER CUT VERTICAL STRIP CHARGE/HAMMER POUCH MULTICAM
Warriors Strip Charge Pouch is made from double layer laminate fabric and designed to hold either a strip charge or a collapsible breaching hammer. Comes with a removable Velcro lid that Velcro’s to the inside top section in order to stop vertical movement from the hammer when running etc.