Navigation

Low Profile Carrier V1 MK1 MultiCam

‹Return to Previous Page

Low Profile Carrier V1 MK1 MultiCam

The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.

The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.

Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical QASM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord, Hypalon lining provides additional mag retention when bungee safety is removed. Each front panel pouch has 4 MOLLE slots externally, allowing the attachment of additional pouches such as pistol mag pouches, CAT pouch or Multitool pouch.

Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced laser cutting machines.

Related Products

Wing Velcro ARP Left Side – MultiCam

Our Laser Cut Winged Velcro Adjustable Radio Pouch ( Left Side ) can accommodate a wide variety of personal radios. Velcro and bungee closure is fully adjustable for height and double Mil-Spec elastic provides the lateral tension for various widths of radio. The WV-ARP-L Velcro’s under the front panel of...

Triple 40mm Flash Bang Pouch – MultiCam

Our Laser Cut Triple Flash Bang Pouch attaches to the back of the full range of Warriors Carries and back panels. The W-LC-T40-FBP holds 3 x NICO style Multi Bangs and is held in place via bungee retention cord. Made using a combination of double-layered Mil-Spec elastic and Laminate, to...

Single 40mm Flash Bang Pouch – MultiCam

Our Laser Cut Single Flash Bang Pouch attaches to the full range of Warriors Carries, Belts and Back Panels. The W-LC-T40-FBP holds 1 x NICO style Multi Bangs and is held in place via bungee retention cord. Made using a combination of double-layered Mil-Spec elastic and Laminate, to produce a...

Low Profile Carrier V1 MK1 Black

The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds. The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific. Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical QASM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord, Hypalon lining provides additional mag retention when bungee safety is removed. Each front panel pouch has 4 MOLLE slots externally, allowing the attachment of additional pouches such as pistol mag pouches, CAT pouch or Multitool pouch. Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced laser cutting machines.

Fight Light Belt – Ranger Green

Our Laser Cut Fight Light Belt, is a slimline belt solution that has been designed to be compatible with the full range of Warriors laser pouches and holsters. The Fight Light Belt has a 45mm tall profile and has a series of horizontal laser cut slots that accept MOLLE webbing...

Low Profile Carrier V2 Black

The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds. The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.

Low Profile Carrier V1 MK1 Ranger Green

The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds. The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific. Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical QASM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord, Hypalon lining provides additional mag retention when bungee safety is removed. Each front panel pouch has 4 MOLLE slots externally, allowing the attachment of additional pouches such as pistol mag pouches, CAT pouch or Multitool pouch. Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced laser cutting machines.

Low Profile Carrier V2 MK1 Ranger Green

The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds. The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific. Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical QASM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord, Hypalon lining provides additional mag retention when bungee safety is removed. Each front panel pouch has 4 MOLLE slots externally, allowing the attachment of additional pouches such as pistol mag pouches, CAT pouch or Multitool pouch. Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced laser cutting machines.

Low Profile Carrier V2 Ranger Green

The Patent Pending Warrior Laser Cut Low Profile Plate Carrier (LPC) is at the forefront of cutting edge innovation. Manufactured using our proprietary laminate material and precision cut using the highest quality laser technology for optimum production accuracy to produce a flawless lightweight solution. Designed with direct input from serving...

Detachable Triple Bungee 5.56 Panel – Black

Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical SQM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord,...