Compact Dump Pouch – MultiCam
Compact Dump Pouch – MultiCam
Product Information
Product code: W-LC-CDP-MC Category: MultiCam Utility PouchesOur Laser Cut Compact Dump Pouch can be belt mounted or attached to any carrier in the Warrior range. Made using a combination of Mil-Spec elastic and nylon to produce an extremely compact design. To open, simply release the outer Hypalon safety tab and then pull the inner tab to deploy fully. To repack simply insert the bag section back into its pouch, and reapply the safety tab.
This attaches using 2 MOLLE arms.
Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced laser cutting machines.
* The pictures may not reflect product enhancement’s and developments that have occurred since the photograph was taken
Available in
Compact Dump Pouch – Black
Our Laser Cut Compact Dump Pouch can be belt mounted or attached to any carrier in the Warrior range. Made using a combination of Mil-Spec elastic and nylon to produce an extremely compact design. To open, simply release the outer Hypalon safety tab and then pull the inner tab to...
Compact Dump Pouch – Ranger Green
Our Laser Cut Compact Dump Pouch can be belt mounted or attached to any carrier in the Warrior range. Made using a combination of Mil-Spec elastic and nylon to produce an extremely compact design. To open, simply release the outer Hypalon safety tab and then pull the inner tab to...
Related Products
Smoke Grenade Pouch – MultiCam
Our Laser Cut Smoke Grenade Pouch can be belt mounted or attached to any of Warriors Carriers, Belts or 901 style Chest Rigs. Holds a single smoke or phosphorus grenade, and includes a plastic clip for single-handed silent opening. Made using a combination of double Mil-Spec elastic and laminate. Attaches...
Single Bungee Pistol Pouch – MultiCam
Our Laser Cut Single Bungee Pistol Mag Pouch can be belt mounted or attached to any carrier in the Warrior range. Holds most standard 9mm, and .40 Cal pistol mags. Made using Double layered Mil-Spec elastic and laminate to produce an extremely compact design, with Hypalon coated pull tab for...
Low Profile Carrier V2 MultiCam
The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
Fight Light Belt – MultiCam
Our Laser Cut Fight Light Belt, is a slimline belt solution that has been designed to be compatible with the full range of Warriors laser pouches and holsters. The Fight Light Belt has a 45mm tall profile and has a series of horizontal laser cut slots that accept MOLLE webbing...
Large Horizontal Utility Pouch – MultiCam
Warriors Laser Cut Large Horizontal Utility Pouch has been designed as a multi-purpose pouch that fits on the rear of all Warrior plate carriers, the rear of Warriors Zip on Assaulter Back Panel, Warriors range of load carrying belts and on our range of medium and large tactical bags. The...
Fight Light Belt – Ranger Green
Our Laser Cut Fight Light Belt, is a slimline belt solution that has been designed to be compatible with the full range of Warriors laser pouches and holsters. The Fight Light Belt has a 45mm tall profile and has a series of horizontal laser cut slots that accept MOLLE webbing...
Medium Horizontal Utility Pouch – MultiCam
Warriors Laser Cut Medium Horizontal Utility Pouch has been designed as a multi-purpose pouch that fits on the rear of all Warrior plate carriers, the rear of Warriors Zip on Assaulter Back Panel, Warriors range of load carrying belts and on our range of medium and large tactical bags. The...
Small Vertical Utility Pouch – MultiCam
Our Laser Cut Small Vertical Utility Pouch can be used as a general utility pouch or to carry a personal medical kit. There are 4 internal elastic loops and a lined internal pocket/sleeve to help separate and organize gear. The Laser Cut SVUP can be attached via 2 MOLLE arms...
Detachable Triple Bungee 5.56 Panel – MultiCam
Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical SQM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord,...
Frag Grenade Pouch – MultiCam
Our Laser Cut Frag Grenade Pouch is manufactured using a combination of double-layered Mil-Spec elastic and laminate. Holds a single M67 style fragmentation grenade, includes a plastic clip for single-handed silent opening. Attaches via two MOLLE arms. Engineered from our high-quality composite laminate material and manufactured using our state of...