Detachable Triple Bungee 5.56 Panel – Ranger Green
Available in
Detachable Triple Bungee 5.56 Panel – MultiCam
Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical SQM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord,...
Detachable Triple Bungee 5.56 Panel – Black
Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical SQM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord,...
Related Products
Single Bungee Pistol Pouch – MultiCam
Our Laser Cut Single Bungee Pistol Mag Pouch can be belt mounted or attached to any carrier in the Warrior range. Holds most standard 9mm, and .40 Cal pistol mags. Made using Double layered Mil-Spec elastic and laminate to produce an extremely compact design, with Hypalon coated pull tab for...
Low Profile Carrier V2 Black
The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
Smoke Grenade Pouch – MultiCam
Our Laser Cut Smoke Grenade Pouch can be belt mounted or attached to any of Warriors Carriers, Belts or 901 style Chest Rigs. Holds a single smoke or phosphorus grenade, and includes a plastic clip for single-handed silent opening. Made using a combination of double Mil-Spec elastic and laminate. Attaches...
Detachable Triple Snap Mag Panel – Ranger Green
Warriors Triple Snap Mag Panel, is a designed to hold 3 x 5.56 mags which are held in place by thermoplastic sleeves, allowing strong retention with the advantage of single pull mag draw, for fast dynamic reloads. The panel comes with a Velcro back and 2 male clips designed to...
Single Bungee 5.56 Pouch – Ranger Green
Our Laser Cut Single 5.56 Mag Pouch attaches to the full range of Warriors Belts and Carries. The W-LC-SB-556P holds a single 5.56mm x 45mm mag, and is held in place via bungee retention cord, Hypolon lining provides additional mag retention when bungee safety is removed. Each mag pouch has...
SINGLE SNAP MAG POUCH 9MM SHORT RANGER GREEN
Warrior Laser Cut Single Snap Mag Pouch 9 mm is designed to hold 1 x 9 mm magazine, which is held in place by a thermoplastic sleeve, allowing strong retention with the advantage of single pull mag draw, for fast dynamic reloads. Ideal for attachment to belts but equally at...
Triple 40mm Flash Bang Pouch – Ranger Green
Our Laser Cut Triple Flash Bang Pouch attaches to the back of the full range of Warriors Carries and back panels. The W-LC-T40-FBP holds 3 x NICO style Multi Bangs and is held in place via bungee retention cord. Made using a combination of double-layered Mil-Spec elastic and Laminate, to...
Compact Dump Pouch – MultiCam
Our Laser Cut Compact Dump Pouch can be belt mounted or attached to any carrier in the Warrior range. Made using a combination of Mil-Spec elastic and nylon to produce an extremely compact design. To open, simply release the outer Hypalon safety tab and then pull the inner tab to...
Low Profile Carrier V2 MultiCam
The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
Adjustable Radio Pouch – MultiCam
Our Laser Cut Adjustable Radio Pouch can accommodate a wide variety of personal radios. Velcro and bungee closure is fully adjustable for height and double Mil-Spec elastic provides the lateral tension for various widths of radio. The Laser Cut ARP can be attached via 2 MOLLE arms to the range...