7.62 Mag Pouch Insert for Kangaroo Pouch Coyote Tan
7.62 Mag Pouch Insert for Kangaroo Pouch Coyote Tan
Product Information
Product code: W-LC-IV7-CT Category: Coyote Tan Ammo Pouches7.62 Mag Pouch Insert for Kangaroo Pouch Coyote Tan
The Internal Velcro 7.62 mag pouch is a versatile addition to the Warrior range. Due to it being constructed from strong elastic it will easily accept all 7.62 pistol magazines and similar calibre magazines. The pouch has an adjustable Velcro retention strap to the bottom, allowing for operator specific positioning.
Designed specifically to be fitted within Warrior’s Laser Cut Kangaroo 7.62 pouch (W-LC-DFP-KP7), the rear of the pouch features Velcro “hook” which means it will strongly “stick” to the inside of any pouch/bag that is lined with Velcro “loop” making it extremely versatile.
* The pictures may not reflect product enhancement’s and developments that have occurred since the photograph was taken
Related Products
Low Profile Carrier V2 MultiCam
The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
Single Bungee Pistol Pouch – MultiCam
Our Laser Cut Single Bungee Pistol Mag Pouch can be belt mounted or attached to any carrier in the Warrior range. Holds most standard 9mm, and .40 Cal pistol mags. Made using Double layered Mil-Spec elastic and laminate to produce an extremely compact design, with Hypalon coated pull tab for...
TacHook Tactical Hanger – Coyote Tan
The TacHook Tactical Hanger is purpose built to hang, store, carry heavy equipment such as Body , Carriers, tactical Vests, Back Packs, Fire Fighters Jackets, Tactical Pants and much more. The TacHook Tactical Hanger is constructed from co-polymer for ultimate strength and durability. Each hanger has a 64kg (140+ lbs)...
Low Profile Carrier V2 Black
The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilizes state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
Single Bungee 5.56 Pouch – MultiCam
Our Laser Cut Single 5.56 Mag Pouch attaches to the full range of Warriors Belts and Carries. The W-LC-SB-556P holds a single 5.56mm x 45mm mag, and is held in place via bungee retention cord, Hypolon lining provides additional mag retention when bungee safety is removed. Each mag pouch has...
Double 9mm Mag Pouch Insert for Kangaroo Pouch Coyote Tan
Double 9mm Mag Pouch Insert for Kangaroo Pouch Coyote Tan The Internal Velcro Double 9mm mag pouch is a versatile addition to the Warrior range. Due to it being constructed from strong elastic it will easily accept all 9mm pistol magazines and similar calibre pistol magazines. The pouch has an...
Detachable Triple Bungee 5.56 Panel – Black
Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical SQM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord,...
Smoke Grenade Pouch – MultiCam
Our Laser Cut Smoke Grenade Pouch can be belt mounted or attached to any of Warriors Carriers, Belts or 901 style Chest Rigs. Holds a single smoke or phosphorus grenade, and includes a plastic clip for single-handed silent opening. Made using a combination of double Mil-Spec elastic and laminate. Attaches...
Low Profile Laser Belt with Cobra Buckle Belt – MultiCam
This variation of the belt comes with a composite GT Cobra buckle belt. Our Laser Cut Low Profile Laser Belt (LPLB) offers a very light weight, and extremely strong, 2 stage low profile platform capable of carrying a wide variety of mission specific pouches and holsters including Drop Leg rigs....
Single 40mm Flash Bang Pouch – MultiCam
Our Laser Cut Single Flash Bang Pouch attaches to the full range of Warriors Carries, Belts and Back Panels. The W-LC-T40-FBP holds 1 x NICO style Multi Bangs and is held in place via bungee retention cord. Made using a combination of double-layered Mil-Spec elastic and Laminate, to produce a...