Personal Retention Lanyard with Snap Shackle and TANGO Carabiner Clip Ranger Green
Warrior’s Personal Retention Lanyard with Snap Shackle and TANGO Carabiner Clip has an overall length of 66cm (26″) including the TANGO clip, and will expand to 106cm (42″) inclusive of the clip. Ideal for use on helicopter ops and maritime operations . The TANGO carabiner is simple to use and...
Tegris Belt with 38mm Wide With Inner Belt Ranger Green
- Lightweight and strong
- Zero sag Ridged Stability System
- MOLLE compatible
- Low profile
- Non IR light reflective
- Hook and Loop Velcro attachment
- Choice of inner belt height - 38mm and 48mm
- D-ring Cobra® Buckle
- Made in the UK
Tegris Belt with 48mm Wide With Inner Belt Ranger Green
- Lightweight and strong
- Zero sag Ridged Stability System
- MOLLE compatible
- Low profile
- Non IR light reflective
- Hook and Loop Velcro attachment
- Choice of inner belt height - 38mm and 48mm
- D-ring Cobra® Buckle
- Made in the UK
Two Point Laser Cut Weapon Sling – Ranger Green
Warrior 2 point Laser Cut sling is an adaptive modular sling capable of fitting on most assault rifles. The adjustment system is operated via an adjuster pull cord in order to transition the sling from a non offensive, hands free carry posture, to a rapid combat ready / shooting position...
Warrior T1 Tegris Wing Velcro Universal Panel Ranger Green
The Warrior T1 Tegris Wing Velcro Universal Panel MOLLE is designed to quickly enhance the functionality and versatility of your setup. T1-WV-UPM allows for excellent flexibility when mounting key accessories such as radio pouches, mag pouches, small medical and tourniquet pouches, these can be attached via the MOLLE loops or...
Drop Down Velcro Utility Pouch – Ranger Green
Our Laser Cut Drop Down Velcro Utility Pouch hangs under the front flap of most carriers and attaches quickly and securely via Velcro. Ideal for use with Warriors LPC, DCS, RPC, QRC and PCR Chest rig. There are 2 zip pockets, the larger and main compartment is designed for storage...
Fight Light Belt – Ranger Green
Our Laser Cut Fight Light Belt, is a slimline belt solution that has been designed to be compatible with the full range of Warriors laser pouches and holsters. The Fight Light Belt has a 45mm tall profile and has a series of horizontal laser cut slots that accept MOLLE webbing...
Compact Dump Pouch – Ranger Green
Our Laser Cut Compact Dump Pouch can be belt mounted or attached to any carrier in the Warrior range. Made using a combination of Mil-Spec elastic and nylon to produce an extremely compact design. To open, simply release the outer Hypalon safety tab and then pull the inner tab to...
Laser Cut Assaulters Back Panel – Ranger Green
Our Laser Cut Assaulters Back Panel (ABP), has been designed to be compatible with the full range of Warriors Laser Cut LPC Carrier can also be used with our Elite Ops range of carriers, (DCS, RPC, LPC, and QRC) The ABP quickly zips onto the rear of the carrier via...
Low Profile Carrier V1 Ranger Green
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
Size Medium: Will fit up to a size 45" (114cm) chest.
Size Large: Will fit Chest sizes 45" (114cm) to 52" (132cm)
Low Profile Carrier V2 Ranger Green
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
Size Medium: Will fit up to a size 45" (114cm) chest.
Size Large: Will fit Chest sizes 45" (114cm) to 52" (132cm)
Quad Release Plate Carrier – Ranger Green
Our Quad Release Carrier (QRC) is a compact carrier designed to allow a high and effective level of armour coverage, without compromising the operator’s movement. The QRC utilises our quick release clips on the shoulders and sides for ease of access during daily use and for rapid removal when required....