Low Profile Carrier V1 Black
Available in
Low Profile Carrier V1 Ranger Green
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
Size Medium: Will fit up to a size 45" (114cm) chest.
Size Large: Will fit Chest sizes 45" (114cm) to 52" (132cm)
Low Profile Carrier V1 MultiCam
The Warrior Laser Cut Low Profile Plate Carrier (LPC) is at the forefront of cutting edge innovation. Manufactured using our proprietary laminate material and precision cut using the highest quality laser technology for optimum production accuracy to produce a flawless lightweight solution. Designed with direct input from serving operators within...
Related Products
Low Profile Carrier V1 MK1 Ranger Green
The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical QASM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord, Hypalon lining provides additional mag retention when bungee safety is removed. Each front panel pouch has 4 MOLLE slots externally, allowing the attachment of additional pouches such as pistol mag pouches, CAT pouch or Multitool pouch.
Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced laser cutting machines.
Recon Carrier Black
The RPC is the latest evolution of carriers from Warrior Assault Systems. Designed to be a lightweight and versatile low profile carrier offering enhanced mobility without compromising protection. The RPC has been developed to hold medium and large SAPI and ESAPI stand alone s and the most common 10″ x...
Laser Cut Wing Velcro Universal Tourniquet Holder – Black
The Warrior Laser Cut Wing Velcro Universal Tourniquet Holder, the ultimate solution for securely and conveniently carrying your tourniquet. Designed with precision and functionality in mind, this tourniquet holder features a laser-cut wing design that ensures a perfect fit. Crafted from durable materials, this holder is built to withstand the...
Laser Cut Assaulters Back Panel – Black
Our Laser Cut Assaulters Back Panel (ABP), has been designed to be compatible with the full range of Warriors Laser Cut LPC Carrier can also be used with our Elite Ops range of carriers, (DCS, RPC, LPC, and QRC) The ABP quickly zips onto the rear of the carrier via...
Low Profile Carrier V1 Black
The LPC features our new air vent thermo pads, which allows heat to evaporate from the body and increase the airflow to assist in cooling.
The LPC utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and hook and loop which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
The LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis, but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
Size Medium: Will fit up to a size 45" (114cm) chest.
Size Large: Will fit Chest sizes 45" (114cm) to 52" (132cm)
Laser Cut LPC (with Ladder Sides) with Detachable Triple Bungee 5.56 Panel Black
The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical QASM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord, Hypalon lining provides additional mag retention when bungee safety is removed. Each front panel pouch has 4 MOLLE slots externally, allowing the attachment of additional pouches such as pistol mag pouches, CAT pouch or Multitool pouch.
Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced laser cutting machines.
Low Profile Carrier V2 MK1 Combo Black
- Size(S-M) 34” (86cm) – 42” (106cm) Chest
- Size(M-L) 42” (106cm) – 50” (127cm) Chest
- Comes with Ladder Sides
- Includes Detachable MK1 Panel
- 3 x 5.56 Bungee Magazines Pouches
- 2 x 9mm Magazines Pouches
- 2 x Small Utility Pouches
- Free Plain MOLLE Detachable Panel
- Made from Mil Spec Materials
- Thermo Pads for Cooling & Comfort
- Compatible with Back Panels
- Interchangeable Front Panels
- Quick release Speed Clips
- Large Upper Admin Pocket
- Removable shoulder Pads
- Hypalon shoulders
- Low profile
- Lightweight
Low Profile Carrier V1 MK1 Black
The Laser Cut LPC features our new air vent thermo pads, which allow heat to evaporate from the body and increased airflow to assist in cooling. The thermo pad also helps to decrease the back plate signature associated with ballistic impact and trauma. The Laser Cut LPC incorporates our speed clip system, which allows very rapid removal of the carrier on a day to day basis but also in an emergency situation, no complicated cables to worry about, and reassembly takes seconds.
The Laser Cut LPC comes as standard with our precision Laser Cut style sides, and utilises state of the art materials to reduce the overall signature and weight. It comes as standard with a removable MOLLE front flap held in place by 2 vertical QASM clips and Velcro which allows the panel to be removed and replaced with a wide variety of preconfigured panels that are both weapon and mission specific.
Our Laser Cut Detachable Triple 5.56 Mag Pouch is a removable Front Panel which attaches to the front of Warriors Laser Cut LPC Plate Carrier, via Velcro and 2 Vertical QASM clips. The DFP-TB-556P holds 3 x 5.56mm x 45mm mags, and are held in place via bungee retention cord, Hypalon lining provides additional mag retention when bungee safety is removed. Each front panel pouch has 4 MOLLE slots externally, allowing the attachment of additional pouches such as pistol mag pouches, CAT pouch or Multitool pouch.
Engineered from our high-quality composite laminate material and manufactured using our state of the art advanced laser cutting machines.
T1 Tegris Single Elastic 5.56mm Black
Introducing the new Tegris range of elastic inserts, available as a single or triple elastic 5.56mm insert and the double 9mm option. These are a versatile and practical accessory designed for efficient storage of tactical and pistol magazines and various medical accessories. They have been constructed using the popular composite...
Frag Grenade Pouch – Black
Our Laser Cut Frag Grenade Pouch is manufactured using a combination of double-layered Mil-Spec elastic and laminate. Holds a single M67 style fragmentation grenade, includes a plastic clip for single-handed silent opening. Attaches via two MOLLE arms. Engineered from our high-quality composite laminate material and manufactured using our state of...